產品說明
產 品 介 紹
產品詳細規格
Projector type | 1-Chip DLP™ projector |
DLP™ chip | |
Panel size | 17.0 mm (0.67 in) diagonal, 16:10 aspect ratio |
Display method | DLP™ chip x 1, DLP™ projection system |
Number of pixels | 2,304,000 (1920 x 1200) pixels |
Light source | Laser diodes |
Light output | 10,000 lm*1 / 10,500 lm (Center)*2 |
Time until light output declines to 50 %*3 | 20,000 hours (NORMAL) / 24,000 hours (ECO) |
Resolution | 4,608,000 pixels / 2715 x 1697 dots |
* With Smooth Pixel Drive: ON. | |
Contrast ratio*1 | 10,000:1 (Full On/Full Off) * With [Dynamic Contrast] set to [3]. |
Screen size (diagonal) | 1.27–15.24 m (50–600 in), 1.27–5.08 m (50–200 in) with ET-DLE055, 2.54–8.89 m (100–350 in) with ET-DLE035, 2.54–10.16 m (100–400 in) with ET-DLE020, 16:10 aspect ratio |
Center-to-corner zone ratio*1 | 90% |
Lens | PT-RCQ10: Powered zoom (throw ratio 1.71–2.41:1), powered focus F 1.7–1.9, f 25.6–35.7 mm |
PT-RCQ10L: Optional powered zoom/focus lenses | |
Lens shift*4 | |
Vertical | +50 %, -16 % (+40 %, -16 % with ET-DLE060) (powered) |
(from center of screen) | |
Horizontal | +30 %, -10 % (+10 %, -20 % with ET-DLE020, +19 %, -10 % with ET-DLE060, +28 %, -10 % with ET-DLE105/ET-DLE085) (powered) |
(from center of screen) | |
Keystone correction range | Vertical: ±40 ° (±5 ° with ET-DLE020, ±16 ° with ET-DLE060, ±22 ° with ET-DLE105/ET-DLE085/ET-DLE055, +5 ° with ET-DLE035), |
Horizontal: ±15 ° (±10 ° with ET-DLE060) (cannot be operated with ET-DLE035/ET-DLE020) | |
Keystone correction range with optional ET-UK20 Upgrade Kit | Vertical: ±45 ° (±16 ° with ET-DLE060, ±40 ° with ET-DLE150/ET-DLE250/ET-DLE170, ±22 ° with ET-DLE105/ET-DLE085/ET-DLE055), |
Horizontal: ±40 ° (±10 ° with ET-DLE060, ±15 ° with ET-DLE105/ET-DLE085/ET-DLE055), | |
When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding a total of 55 °. | |
Installation | Ceiling/floor, front/rear, free 360-degree installation |
Terminals | |
SDI IN | BNC x 1: 3G/HD-SDI input |
HDMI IN | HDMI 19-pin x 1 (Deep Color, compatible with HDCP 2.2, 4K/60p signal input*5) |
DVI-D IN | DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) |
MULTI PROJECTOR SYNC IN | BNC x 1 |
MULTI PROJECTOR SYNC OUT | BNC x 1 |
SERIAL IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
SERIAL OUT | D-sub 9-pin (male) x 1 for link control |
REMOTE 1 IN | M3 x 1 for wired remote control |
REMOTE 1 OUT | M3 x 1 for link control (for wired remote control) |
REMOTE 2 IN | D-sub 9-pin (female) x 1 for external control (parallel) |
LAN | RJ-45 x 1 for network connection, 10Base-T/100Base-TX, compliant with PJLink™ (Class 2), Art-Net |
DIGITAL LINK | RJ-45 x 1 for network, DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX, compatible with Art-Net, PJLink™ (Class 2), Deep Color, HDCP 2.2, 4K/60p signal input*5 |
USB | USB Connector (Type A) x 1 for Cloning/Wireless Module (output 5 V/500 mA) |
Expansion Slot | Open slot for SLOT NX compatible interface board |
Power supply | AC 100–240 V, 50/60 Hz |
Power consumption | 1,100 W |
Cabinet materials | Molded plastic |
Operation noise*1 | 43 dB (Normal)/40 dB (Quiet 1)/38 dB (Quiet 2) |
Dimensions (W x H x D) | PT-RCQ10: 498 x 200*6 x 581 mm (19 19/32˝ x 7 7/8˝ *6 x 22 7/8˝ ) (with supplied lens) |
PT-RCQ10L: 498 x 200*6 x 538 mm (19 19/32˝ x 7 7/8˝ *6 x 21 3/16˝ ) (without lens) | |
Weight*7 | PT-RCQ10: Approx. 24.2 kg (53.4 lbs) (with supplied lens) |
PT-RCQ10L: Approx. 23.4 kg (51.6 lbs) (without lens) | |
Operating environment | Operating temperature: 0–45 °C (32–113 °F)*8 *9, operating humidity: 10–80 % (no condensation) |
Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit, ET-CUK10 Auto Screen Adjustment Kit), Smart Projector Control for iOS/Android™ |
如有產品規劃問題,歡迎你來電詢問,
服務專線:(03)4020662#12
服務時間:星期一~五 9:00~18:00